topheader-logo

Nickel Plating

Nickel electroplating is a process of adding a thin layer of nickel on a metal part. The parts must be clean and free of dirt, corrosion, and defects before this plating can begin. A combination of heat treating, cleaning, masking, pickling, and etching is could be used in order to clean and protect the part during the plating process. The part will then immerse into an electrolyte solution and function as the cathode. The nickel anode is dissolved into the electrolyte in form of nickel ions which will travel through the solution and build up on the cathode.

Singapore Plant

Process
Specification
Process Classification
Tank Size (mm)
(L) x (W) x (H)
Nickel Plating QQ-N-290 Bright Nickel 450 x 730 x 750
Nickel Sulphamate 750 x 840 x750
Watts Nickel 750 x 840 x750
Remarks: Please contact us directly for tank size other than the specified.

Penang Plant

Process
Specification
Process Classification
Tank Size (mm)
(L) x (W) x (H)
Nickel Plating QQ-N-290 Bright Nickel 740 x 520 x 1000
Nickel Sulphamate
Watts Nickel
Remarks: Please contact us directly for tank size other than the specified.

{gallery}nickelplating{/gallery}

11